Place the fountain base in the tub water and let your child run the wacky water-show.
Press the orange button to get it started and allow the water pump to circulate bath water, so there is no waste during hours of play.
Stack the three interchangeable boats and two figures and turn the fountain into a different, wonderful structure each time.
Switch between the various boats, stacking them in new ways on the fountain base and let your child experience the varied water spray effects they create.
Fill and empty the boats, allow them to float and sink in the tub - and soon your child will start to curiously experiment with these effects on their own.
Award
Winning
What's Inside
1 x floating base with a figure-shaped on/off button
3 x boats of different sizes and water spray effects
2 x figures with unique water effects for each
Award
Winning
Play & Develop
Cognitive Development
Physical Development
Social & Emotional Development
"We love this toy so much that we bought it as a present for a friend... Stacking the boats is great. The little surprises that each thing does when you put it on the fountain is great...It's also super fun in a kiddy pool outside in the summertime. Kids just love these toys..." | MetroMomClub , Brooklyn, NY, US
Place the fountain base in the tub water and let your child run the wacky water-show.
Press the orange button to get it started and allow the water pump to circulate bath water, so there is no waste during hours of play.
Stack the three interchangeable boats and two figures and turn the fountain into a different, wonderful structure each time.
Switch between the various boats, stacking them in new ways on the fountain base and let your child experience the varied water spray effects they create.
Fill and empty the boats, allow them to float and sink in the tub - and soon your child will start to curiously experiment with these effects on their own.
Good to Know
Safety first
The fountain can be used in shallow waters, so a safe water level is enough. Also, since the fountain circulates water from the tub, water temperature remains constant.
Eco-friendly
No more running water! The fountain caters to kids’ love of running water by spraying bath water using its unique circulating water pump (CWP).
Certified
Like all Yookidoo motorized bath toys, our award-winning fountain uphold the most stringent water safety standards and is a IPX7 waterproof certified bath toy.
FAQ
-
Is it safe to use this battery-operated product under water?
Yes. The Stack 'N' Spray Tub Fountain upholds the most stringent safety standards (ASTM, EN71, ect’) and is IPX7 waterproof certified, ensuring the utmost safety in using battery-operated products when immersed in water. Still, please follow these guidelines to ensure optimal safe use of the product:
1. Use 3 X AA batteries only.
2. WARNNING: don’t use rechargeable batteries.
3. Use quality batteries of a known brand.
4. Make sure the battery compartment is tightly sealed after every time you change the batteries.
-
Is this product BPA free?
Yes, this product is BPA free.
-
What age is this product for?
This product is recommended for children ages 1-6 years. No matter what their age, you should never leave a child unattended in the bathroom or bathtub.
-
What types of batteries are needed to operate the product?
3 X AA batteries (not included) of good quality and a known brand are needed. WARNNING: don’t use rechargeable batteries. Do not mix old or used and new batteries, or batteries of different types. Remove batteries from the product after use or if storing for long periods.
-
Where is the battery compartment located on the fountain?
The battery compartment is located on the underside of the fountain base.
-
How do I insert the batteries?
Attention! Before inserting batteries, ensure the product is dried thoroughly! To insert batteries, unscrew the battery compartment cover (located on the underside the fountain base) with a Phillips Head screwdriver. Insert 3 X 1.5V AA (LR6) batteries, ensuring correct polarity. Replace the compartment cover and screw firmly into position (See instructions – images 1+2). Before using, make sure the battery compartment is completely sealed!
-
What is the required water height to operate the fountain?
Water level should be minimum 5 inches (12 cm). Submerge the base for a few seconds at the beginning of every use to achieve optimal water flow.
-
How do I start the Tub Fountain?
To start the tub fountain, first submerge the base for a couple of seconds to achieve optimal water flow. Then, press the orange Peek-A-Boo figure located on the fountain base.
-
Which water effects are created by the various boats and figures?
• Red boat spins as it sprays.
• Light blue boat has a swiveling propeller.
• The octopus figure spouts water in all directions.
• The scuba pal figure spouts hair as he squirts from his mouth.
-
Is there a specific stacking order for the boats?
No. There is no specific stacking order of the boats. There is no right or wrong.
-
Can the boats be used separately from the fountain base?
Yes. The boats can float independently. Or they can be used as buckets - filled with water and spilled back into the tub.
-
What should I do if I notice mold developing?
It is recommended to properly rinse, drain, and dry out the product after every use. Unless you do that, Yookidoo® bath toys will need a good cleaning every two weeks or so in order to remain mold-free. When a thorough cleaning is required, fill up a bucket with water and add in some vinegar. Let the toy soak in the vinegar water for around 20 minutes, then turn it on and off a few times to circulate the water through the pump. repeat this step with clean water to wash the vinegar out. Rinse it off and dry using a paper or cloth towel.
-
How do I clean the filter?
Unscrew the filter (located on the underside of the fountain base) and pull it out. Wash with soap and water, ensuring that the filter mesh is completely open. Make sure the inner propeller is also clean and spins freely. Re-position the filter and screw in firmly.
-
How often should I clean the filter?
The filter should be cleaned every time batteries are replaced.
-
I screwed the battery compartment cover firmly, but it still looks like the height is not even. Why?
There is a seal located on the cover, preventing water from coming into the battery compartment. Make sure, once more, that the cover is firmly screwed in place before use.
-
The Stack ‘N’ Spray Tub Fountain stopped working. What should I do?
The product may stop working when the propeller or filter are blocked by dirt, hair, or soap. In order to fix this, unscrew the filter and pull it out. Wash with soap and water, ensuring that the filter mesh is completely clean. Make sure the propeller rotates freely. If it does not, try to release the clog with a screwdriver, until it rotates freely again. Reinsert filter and screw into place.
If you want to watch a tutorial: click here.
If the water is still not running, change the batteries and make sure to tightly close the battery compartment lid (see instructions above). -
The Fountain still doesn’t work. What should I do?
1. Verify correct polarity of batteries.
2. Still doesn’t work? Contact us.
-
The yellow propeller on the blue boat is not working/ the spray of the red boat is not working. What should I do?
1. Submerge the base for a few seconds allowing the pump to be filled with water – plug the water output hole with one finger for a minute.
2. Clean filter – clean mesh and make sure that the pump propeller spins freely.
3. Change batteries.
-
What is the date code and where can I find it on the product?
The Yookidoo date code helps us track the production date of the product. The date code of the Yookidoo Stack ‘N’ Spray Fountain is on the green base. It is made up of 5 digits and ends with letters.
